davidbuckley.net
home >  The-Nevik >  Electronics 23 October 2013

The-Nevik - Electronics
November 1997

Motherboard Circuit @ 20th September 2000
With the Kludged 1N4148 diodes on the L293E
23 October 2013 - I can't believe that I have only just noticed that the diagram is wrong!
Nor can I find the original drawing to change it.
The Left eye should go to D5 not D4 and the 4k7 pullup on D5 should go to D7.


Motherboard layout


Motherboard parts
Veroboard
2 x 12 way 0.1 headers
2 x SPDT pcb switches
1 x 1N4001 diode
1 x 20 way DIL socket
1 x L298E 
3 x 4k7 resistors
4 x 0u1 ceramic disk capacitors 
	(using two 0u1 in series made the LDR readings better in the POT command) 
8 x 1N4148 diodes (for L293E protection, omit if using L293D)

Charger-socket parts - (see photo 12)
1 x 3.5mm jack socket
1 x 1N4148 diode
Stamp Brain ver.1

Note the position of the LED and it's jumper have been swapped to make it easier to change the jumper when plugged into the motherboard with a peripheral card in the next slot.


8 LED display